4 GOODYEAR WRANGLER ST TIRES 225/75 R16
$300.00
or
$75.00 for 1 tire.
100% Tread Life
These fit smaller SUV'S for the 16" wheels:
Jeeps
Explorers
Chevy Blazers
and other vehicles
2011-2015 FORD F250/F350 4" ZONE LIFT KIT-GAS
Features:
New front coil springs capable of full coil bind offering off-road performance and great ride qualtiy
Radius arm drop brackets included to properly rotate the front axle
1-1/2" Solid steel track bar with urethane mounts to properly center the axle
New rear U-bolt with high nuts & washers
Rear 5" Block kit to eliminate the factory block - NO stacking blocks!
Performance custom valved Zone Shocks included
NOTES:
Removal of the factory rear block is required. Net rear height gain will vary based on size of the factory block, but will result in a level stance.
If equipped with a 2-piece rear drive shaft, then a carrier bearing drop kit may be required. It is available in the optional accessories (part # F5401).
Although extremely rare, front drive line vibration may occur.
Rear box kit not designed for dually models.
Front exhaust modification may be required to clear the front driveshaft on gas models.
Quick Specs
Front Lift Height: 4?
Front Lift Method: Coil Springs
Rear Lift Height: 3?
Rear Lift Method: Block Kit
Install Time Hrs: 6
Difficulty Level 1-5: 2
Wheel Size: 17 & up
Back Spacing: 4.5?
Max Tire Size: 35 X 12.50
Fitments:
11-15 Ford F250 4WD
11-15 Ford F350 4WD
Will need to know if No Carrier Bearing Drop needed or Yes Carrier Bearing Drop needed.
2007-2015 JEEP JK 3" LIFT KIT- 2 DOOR - ZONE OFFROAD
Features:
Coil springs designed to give a full 3" of lift while maintaining a factory style ride. Our coils are 2door/4door specific, so be sure to select the proper application.
Rear extended sway bar links are included. These links come with urethane bushings to increase performance and reduce body roll. The factory rear links are then used in the front.
A rear track bar relocation system is included to perfectly center the axle under your JK
2" bump stop extensions are included to protect your vehicle while still increasing wheel travel
Brake line relocation brackets are supplied to allow for the dramatic increase in wheel travel
New Zone front and rear shocks are included that are valved specifically for your JK
Right Hand Drive compatible This kit has been approved for use on right hand drive vehicles but may require installation variations. Refer to this kit's online instructions for the most up to date installation instructions and pay close attention to RHD notes.
NOTES:
This complete suspension lift system is designed for 2 door, 4 door and Rubicon models.
The coil springs are 2 door and 4 door specific. Be sure to choose the correct application when ordering.
Factory wheels cannot be re-installed due to rear sway bar link interference.
2012-15 models using the stock front driveshaft require exhaust extension kit J5305 listed in the accessories.
Quick Specs
Front Lift Height: 3?
Front Lift Method: Coil Springs
Rear Lift Height: 3?
Rear Lift Method: Coil Springs
Install Time Hrs: 4-5
Difficulty Level 1-5: 2
Wheel Size: 16 x 8
Back Spacing: 4.5
Max Tire Size: 35? x 12.50
Adjustable LED light bar mounting clamps are an excellent way to mount single row or dual row off road LED light bars to roll cages or other vehicle's tubular accessories. These pivoting clamps will allow to mount up to a 50” light bar to cage even if the cage does not run parallel to the light bar. A simple solution for mounting on brush guard bumpers, roof racks, and wakeboard towers as well. Requires 2 per off road led light bar. Must be purchased with Modular Strap Clamp.
Will ship to you!
30" Heavy Duty Swivel Utility Light Bar with 18 High Power 1 Watt White LEDs. 11~24 VDC operation. Measures 30 inches long with 16 inch power wires. Heavy duty aluminum housing with ON/OFF rocker switch and acrylic lens. Zinc alloy end caps allows light to swivel 180 degrees. Installation in Boat or RV could provide versatile lighting solutions by aiming down on counter for Task, out into room for General or up at ceiling for Accent Lighting. Surface mountable using 4 screw holes on end caps with included screws. Dimensions: 76cm(30") x 4.6cm(1.8") x 5.1cm(2.0").
Features:
18x1 Watts White LEDS
16 inch power wires
ON/OFF Rocker Switch
Zinc Alloy End Caps
Rugged Aluminum Housing
Versatile Task & Accent Lighting
Will ship to you.
4 Goodyear Wrangler ST TIRES
225/75R16
100% Tread life
These tires are new take offs.
$300.00 for 4
of
$75.00 for 1
Does not include tires.
These fit smaller SUV's for 16" wheels:
Jeeps
Explorers
Chevy Blazers
Suspension Front Leveling Kit Coil Spring Leveling System Coil Spring Leveling System; 1 3/4 in. Lift; Incl. 2 1 3/4 in. Polyurethane Coil Spring Spacers; 2 CNC Machined Quick Disc. Sway Bar End Links; FEATURES: Other Parts Required For A Complete Set Durable Squeak Free Performance Easy To Install Limited Lifetime Warranty For the past 25 years Performance Accessories has continued set the industry standard for truck and SUV body lifts. We have the most comprehensive line of body lift kits available on the market today for two and four wheel drive vehicles and continue to dominate the market share with over 90% of all body lifts sold being Performance Accessories. Body lifts came into the market approximately 30 years ago to fill a much needed gap that suspension lifts could not provide. Performance Accessories body lift kits are a very affordable option when considering lifting a vehicle; in some cases a body lift can be as much as three times less than a comparable suspension system. The primary reasons consumers choose to lift their vehicles is to allow for the installation of larger tires and wheels, thus increasing the off-road ability of the vehicle and the desired custom look the consumer is trying to achieve. Performance Accessories body lifts on average allows the consumer to increase tire size by two to three sizes. Performance Accessories body lift kits include the highest quality, laser cut, CNC machined steel components, steering extensions, shift adaptors, body lift blocks, bushings and body mounts. All our hardware is zinc plated and or powder coated for corrosion protection and come with complete detailed installation instructions. We also offer urethane gap guards to fill the gap between the frame and the lifted body to give the consumer that completed OEM look. When you combine the many reasons listed above along with our commitment to total customer satisfaction in our products and services we are sure you will agree that Performance Accessories will continue to lead the way in value and performance for many years to come.
Zone Offroad 6" Suspension System09-13 Dodge Ram 2500/3500 This new Zone Offroad 6" suspension system for the 09-13 Dodge Ram 2500 & 09-12 Dodge Ram 3500 is performance packed and budget friendly for those looking to get 37" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control. In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft.
Zone Offroad 6" Suspension System09-13 Dodge Ram 2500/3500 This new Zone Offroad 6" suspension system for the 09-13 Dodge Ram 2500 & 09-12 Dodge Ram 3500 is performance packed and budget friendly for those looking to get 37" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control. In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft.
Suspension Front Leveling Kit Coil Spring Leveling System Coil Spring Leveling System; 1 3/4 in. Lift; Incl. 2 1 3/4 in. Polyurethane Coil Spring Spacers; 2 CNC Machined Quick Disc. Sway Bar End Links; FEATURES: Other Parts Required For A Complete Set Durable Squeak Free Performance Easy To Install Limited Lifetime Warranty For the past 25 years Performance Accessories has continued set the industry standard for truck and SUV body lifts. We have the most comprehensive line of body lift kits available on the market today for two and four wheel drive vehicles and continue to dominate the market share with over 90% of all body lifts sold being Performance Accessories. Body lifts came into the market approximately 30 years ago to fill a much needed gap that suspension lifts could not provide. Performance Accessories body lift kits are a very affordable option when considering lifting a vehicle; in some cases a body lift can be as much as three times less than a comparable suspension system. The primary reasons consumers choose to lift their vehicles is to allow for the installation of larger tires and wheels, thus increasing the off-road ability of the vehicle and the desired custom look the consumer is trying to achieve. Performance Accessories body lifts on average allows the consumer to increase tire size by two to three sizes. Performance Accessories body lift kits include the highest quality, laser cut, CNC machined steel components, steering extensions, shift adaptors, body lift blocks, bushings and body mounts. All our hardware is zinc plated and or powder coated for corrosion protection and come with complete detailed installation instructions. We also offer urethane gap guards to fill the gap between the frame and the lifted body to give the consumer that completed OEM look. When you combine the many reasons listed above along with our commitment to total customer satisfaction in our products and services we are sure you will agree that Performance Accessories will continue to lead the way in value and performance for many years to come.